Infusion / Laminating Resin system AS-EP200

11,99 35,53 

delivery period: 1-3 days


Epoxy Resin for Infusion / Laminating systems

The epoxy resin AS-EP200 is suitable for resin infusion as well as for the manual lamination process. The processing time (/ pot life) of the resin system is 200 min (for 100g). This decreases with larger quantities and extends again in the component. The components can be removed from the mold after 24 hours. For the optimal material strength, the component must be tempered according to the data sheet.


Properties and Areas of Application:

  • Easy impregnation of the reinforcing fibers in the infusion and injection process
  • High static and dynamic strength
  • Thermosetting, demoldable at elevated temperature
  • Suitable for model making, car building, boat building ...


Ordering Information:
The hardener reacts with the surrounding oxygen when stored for a long time. This leads to a yellowing, but this has no effect on its strength and is usually no longer recognizable in the finished component. 


Download technical data sheet

Additional Information

Weight 3 kg
Dimensions 30 × 20 × 40 cm

500g, 750g, 1.000g, 1.500g, 2.000g

You may also like…